Cisco Automation for Switches, Routers & Firewalls
OrcaMonitor is built for teams that live in Cisco environments — campus, data center, service provider and WAN. Discover Cisco switches, routers and firewalls across IOS, IOS-XE, IOS-XR, NX-OS and ASA, back up configs, cut alert noise, and let an AI agent diagnose incidents and propose the fix — with human approval on every change.
OrcaMonitor on the Cisco App MarketplaceProblems we solve
- Manual Cisco CLI work across hundreds of switches and routers
- Config drift and missing backups after emergency changes
- Alert storms from SNMP traps with no root-cause grouping
- Slow MTTR when NOC staff hand-diagnose BGP, OSPF, or interface flaps
- Mixed Cisco OS families — IOS-XE, IOS-XR, NX-OS, ASA — each with its own command set
- Automation tooling that would change production without a review step
Cisco automation focus
- Cisco Catalyst & Nexus switching
- Cisco ISR / ASR routing
- Cisco IOS-XE, IOS-XR and NX-OS coverage
- Cisco ASA / firewall ops workflows
- SNMP + syslog correlation for Cisco estates
- Safe automation with break-glass and RBAC
Capabilities
Cisco device discovery & inventory
SNMP, CDP/LLDP and API-based discovery for Catalyst, Nexus, ISR, ASR, Meraki-adjacent workflows, and ASA firewalls — unified in one inventory rather than one console per platform.
Automated Cisco config backup
Scheduled and change-triggered configuration backups with diff views, so an emergency change is captured when it happens rather than discovered missing during the next audit or outage.
Approval-gated Cisco remediation
The AI agent proposes Cisco-aware remediation — interface recovery, routing checks, safe show/run sequences — with the blast radius and a rollback. Nothing executes until a human approves it.
AIOps correlation for Cisco estates
SNMP traps, syslog and device telemetry are grouped by root cause, so a failed uplink surfaces as one incident instead of forty device alarms from the access layer.
Cisco IOS-XE automation
Discover and operate Catalyst switching and ISR/ASR routing on IOS-XE — inventory, config backup, health monitoring and gated remediation — from the same workspace as the rest of the estate.
Cisco IOS-XR automation
Service provider and core IOS-XR platforms are covered for discovery, monitoring and telemetry-driven operations, where the command set and observability model differ from classic IOS.
Cisco NX-OS automation
Nexus data center switching with config backup, drift detection and health monitoring, so fabric changes are captured and reviewed rather than applied node by node from a console.
Cisco ASA automation
ASA firewall operations — inventory, config backup, drift detection and IPsec/VPN diagnosis — with the same approval gate used everywhere else, so a firewall change is never unreviewed.
AI agent and co-pilot for Cisco
An AI agent that works from the incident: it correlates the alert, reads device state and proposes the next command, which is what you need when the fix is not already written down in a playbook. A co-pilot for the engineer, not a replacement for the review.
Ticket + runbook automation
Alerts become tickets with Cisco context, suggested CLI/API steps, and an audit trail for every approved run — the record enterprise change management needs.
Related solutions
FAQ
What is Cisco automation with OrcaMonitor?
Cisco automation in OrcaMonitor means discovering Cisco network devices, monitoring health, backing up configuration, correlating alerts, and running approval-gated remediation so operators automate repetitive Cisco work without uncontrolled changes.
Which Cisco platforms and OS families are supported?
Cisco IOS, IOS-XE, IOS-XR and NX-OS switching and routing, plus ASA firewalls, alongside Arista, Juniper, FortiGate, Palo Alto, MikroTik and Nokia for the rest of the estate. Not every verb exists on every platform, which is why the agent discovers device capabilities before it acts rather than assuming a command will work.
How does Cisco config automation and backup work?
OrcaMonitor takes scheduled and change-triggered configuration backups of Cisco devices and shows diffs between versions. You get a record of what changed and when, which is what turns an undocumented emergency change into something you can review, compare and roll back.
Does OrcaMonitor replace Cisco DNA Center, Catalyst Center or Ansible?
No. It complements them. Catalyst Center handles Cisco campus fabric and lifecycle, and Ansible is excellent for known repeatable tasks. OrcaMonitor adds the AI operations layer: cross-vendor alert correlation, diagnosis of unfamiliar faults, config drift detection, and approval-gated remediation with an audit record.
What is an AI agent or co-pilot for Cisco networks?
It means the assistant works from the incident rather than from a script you wrote in advance: it correlates the alert, reads current device state, and proposes the specific command or change, then waits for approval. That covers the cases your playbooks never encoded, while keeping a human on the execution step.
Is this suitable as an enterprise Cisco automation tool?
It is designed for enterprise change control: RBAC, break-glass access, per-customer isolated environments, and a chained audit record of every proposal, approval and execution. Enterprise buyers usually care less that the automation works than that it can be stopped, reviewed and evidenced — which is the part OrcaMonitor is built around.
Can we automate only Cisco devices first?
Yes. Many customers start with Cisco campus and data-center fleets, then expand to firewalls, servers and other vendors from the same OrcaMonitor workspace. Being vendor-neutral means the same workflow covers the estate you have, not the estate you standardised on.
Is OrcaMonitor listed on the Cisco App Marketplace?
Yes. OrcaMonitor is listed on the Cisco App Marketplace. That page is the Cisco catalog entry for this same approval-gated Cisco automation product.
See every module, pricing tier, and deployment option on the OrcaMonitor overview.